iPaq Familiar 0.5 Boot Log

This is the log of the serial port:

Uncompressing Linux............................................ done, booting t.
Linux version 2.4.7-rmk3-np1-devfs (jamey@rockhopper.crl.dec.com) (gcc version 1
Processor: Intel StrongARM-1110 revision 8       
Architecture: Compaq iPAQ                                                       
On node 0 totalpages: 16384                                                     
zone(0): 16384 pages.                                                           
zone(1): 0 pages.                                                               
zone(2): 0 pages.                                                               
Kernel command line: noinitrd root=/dev/mtdblock/1 init=/linuxrc console=ttySA0 
Console: colour dummy device 80x30                                              
Calibrating delay loop... 137.21 BogoMIPS                                       
Memory: 64MB = 64MB total                                                       
Memory: 62916KB available (1158K code, 261K data, 60K init)                     
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)                   
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)                    
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)                     
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)                   
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)                    
POSIX conformance testing by UNIFIX                                             
Linux NET4.0 for Linux 2.4                                                      
Based upon Swansea University Computer Society NET3.039                         
Initializing RT netlink socket                                                  
CPU clock: 206.400 MHz (max 206.400 MHz)                                        
Starting kswapd v1.8                                                            
devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x2 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. dma period = 1398056 ps dma period = 1398056 ps Console: switching to colour frame buffer device 40x30 sa1100fb_setup_gpio 'mask' for GPIO is 3fc pty: 256 Unix98 ptys configured block: queued sectors max/low 41568kB/13856kB, 128 slots per queue SA1100 flash: probing 32-bit flash bus parse_bootldr_partitions: magic=0x646c7470 parse_bootldr_partitions: numPartitions=0x2 parse_bootldr_partitions: npartitions=0x2 partition bootldr o=0 s=40000 partition root o=40000 s=1fc0000 Using Compaq bootldr partition definition Creating 2 MTD partitions on "SA1100 flash": 0x00000000-0x00040000 : "bootldr" mtd: Giving out device 0 to bootldr 0x00040000-0x02000000 : "root" mtd: Giving out device 1 to root NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) IPv4 over IPv4 tunneling driver sa1100fb_setup_gpio 'mask' for GPIO is 3fc GRE over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Fast Floating Point Emulator V0.0 (c) Peter Teichmann. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com mtdblock_open ok VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing init memory: 60K Setting up RAMFS, please wait... Setting up some devices Executing /sbin/init... INIT: version 2.78 booting Mounting local filesystems... mount: ramfs already mounted on /mnt/ramfs devpts on /dev/pts type devpts (rw,mode=0622) mount: proc already mounted Calculating module dependencies... done. Loading modules: apm h3600_hal_init_module: registering HAL abstraction layer h3600_micro_setup: setting up microcontroller interface apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13) h3600_ts h3600_ts_init_module: registering char device sa1100-rtc SA1100 Real Time Clock driver v1.00 h3600-sleeve init_module successful init major= 0 irq=48 run_sbin_hotplug:74 * hotplug_path=/sbin/hotplug h3600_sleeve_eject-9- sleeve_dev->driver=00000000 sleeve removed h3600_generic_sleeve Linux Kernel Card Services 3.1.22 options: [pm] SA-1100 PCMCIA (CS release 3.1.22) sa1100_h3600_common_pcmcia_get_irq_info sa1100_h3600_common_pcmcia_get_irq_info sa1100: initialization complete h3600_generic_pcmcia_init_module: registering sleeve drivers h3600-uda1341 iPAQ audio support initialized slhc CSLIP: code copyright 1989 Regents of the University of California ppp_generic PPP generic driver version 2.4.1 ppp_async Setting the System Clock using the Hardware Clock as reference... The Hardware Clock does not contain a valid time, so we cannot set the System T. Unable to set system clock. INIT: Entering runlevel: 2 Configuring network interfaces: done. Starting PCMCIA services: modulesinsmod: a module named pcmcia_core already exis insmod: a module named sa1100_cs already exists cardmgr. cardmgr[85]: starting, version is 3.1.22 cardmgr[85]: watching 2 sockets /etc/rc2.d/S50ssh: expr: command not found Starting OpenBSD Secure Shell server: sshderror: Could not load host key: /etc/y Disabling protocol version 1 . Starting X... Restoring touch screen calibration dma period = 1398056 ps dma period = 1398056 ps Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/, removing fro! dma period = 1398056 ps IceWM: Warning: Obsolete option: TitleBarCentered Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/, removing fro! familiar login:

Last modified on 23 Jan 2002 by AO